BP-20 small cracking device using waste tires, waste rubber, waste plastics recycling of fuel oil, the optimal choice of carbon black, steel wire, Chi Ching environmental professional provide waste oil as raw material extraction, waste plastics, waste tires oil refining equipment. Free to teach technology, training and guidance, door factory, junk recycle.
First, product features:
1, diesel vapor separation
2, high profit, high degree of mechanization
3, to adapt to a wide range of raw materials
4, alternating heating, uniform heating
5, automation, energy saving heating slag
6, sustainable development, environmental protection, no smoke and dust emissions. Desulfurization and dust removal and dust removal, dust treatment in line with the requirements of advanced countries in environmental protection.
7, after a thermal cracking two times, and then filter treatment, oil quality to improve a grade, can be directly used as a commodity to sell.
8, high temperature spray evaporation, low temperature immersion, the maximum advantage of small area, easy to clean, the cooling effect is good, generally do not need to use water cooling tower.
9, high cost, oil quality
Two, process flow:
There is no need to waste plastic and rubber to the sediment and water, iron and other impurities, directly into the atmosphere at high temperature cracking processor, catalytic heating and the distillate oil steam, oil and gas through the condenser can be partially liquefied, condensation of mixed oil, liquefied by gas system processor bottom burn; after condensation of the mixed oil, the first to join the fractionation processor heating, by catalytic reforming process and the distillate oil steam and oil steam through the condenser, fractionation based fuel oil, through sedimentation, filtration and chemical treatment, adding various additives, and reorganized as a qualified fuel oil.
Nissan 20 tons of type BP-20 cracking refining equipment
Four, oil refining processor applicable products and industries
Raw oil yield
The general plastics (Note: PET polyester not refining)
Polyvinyl chloride: PVC (such as film, cable, floor, pipe, plate, pipe, shoes, toys, doors and windows, wire skin, stationery, etc.) is not easy to oil refining
Polyethylene, PE (such as films, bottles, electrical insulation materials, handbags, pipes, drums, beverage bottles / calcium bottle, daily necessities, etc.) pure out of the oil rate of 95% about
Polypropylene: PP (such as film, plastic rope, food containers, pots, barrels, furniture, woven bags, caps, car bumper, etc.) pure oil rate of about 90%
PS: PS (such as electrical appliances, stationery, cups, food containers, household appliances, electrical accessories, foam products, toys, etc.) pure oil rate of about 90%
ABS Engineering Plastics: about 40%
Pure white plastic cloth: 70%
Instant noodle packaging bag: 40% or so
Plastic trademark: about 20%
The paper mill wastes (about high water content of about 15-20%, dry 60%)
Direct out: 12-15%
After rinsing: 33-40% or so
Sink material: 50% or so
Life garbage 30-50% or so, about 20% miscellaneous material
Pure plastic cable around 80%
Clean plastic bags more than 50%
The general rubber:
Big car tires 45% or so (steel wire more oil less points)
The car tires, bicycle tires around 35%
Rubber cable leather, shoes and soles around 30% mixed shoes around 35% shoes 20-30%
Waste chemical fiber carpet material: more than 30%
PMMA (organic glass) about 40%
Miscellaneous rubber: about 35%
Tires: steel wire, rubber, carbon black, cracking speed slightly faster.
Plastic: a little more than a little more, the cracking speed is slow..
Five, cracking equipment using fuel
2 fuel oil production
3: bituminous coal, coal carbon incense
4 days gas
Six, cracking equipment main terminal products
1. The use of waste plastic (paper mill waste plastics) refined fuel oil: density of 0.80 + 0.02, color dark red, burning value of 8500 kcal.
2 fuel oil using waste rubber refining: density was 0.90 + 0.02, color black, combustion value is 10500-10100 kcal.
|Volume of reactor||70 M3|
|Applicable material||Scrap tires (need to be crushed), waste plastics, waste rubber, waste oil, asphalt, etc.|
|working pressure||Micro negative pressure（<0.02MPA）|
|Heating fuel||Coal, firewood, natural gas, liquefied gas, tire oil, plastic oil|
|oil rate||40%-45%（Scrap tires）50%-80%（waste plastics）|
|Material||Boiler steel Q245|
|control mode||control cabinet|
|service life||6-8 years|